‚úî„ÄêDesigned for Lithium-Ion Batteries„ÄëCapacity. Li 12.6V 14.6V 60A LiFePO4 Lithium Battery Smart Charger is specially designed for 12.8V LiFePO4 battery or 12.6V Li-ion battery, the voltage is adjustable, the range is 0-15V adjustable. Do not use the charger on a metal surface platform. Buyers have any questions please email me. We will help you solve it as soon as possible. ‚úî„ÄêHigh Efficiency Charging„ÄëConstant current 60A, constant voltage about 14.6V/12.6V, very suitable for large capacity LIFEPO4 battery or lithium battery charging. A 12V100AH ‚Äã‚Äãbattery is fully charged in just 2 hours, while a 10-amp multi-function charger takes 10 hours to fully charge a 100Ah battery. enough current. The current is adjustable from 0-60A. It is recommended to charge the charger with a current of about 55A to prolong the life of the charger. ‚úî„ÄêMultiple Protection„ÄëCapacity. Li 12V 60A fast car lithium battery charger has multiple protections, and the 60A charger has over temperature/overvoltage/short circuit/overcurrent/low voltage protection to prevent damage from misoperation. (!!!Note: The fan will automatically stop running for a few minutes after a power outage.) ‚úî„ÄêEasy operation, indicator light is visible„ÄëConnect the + and - alligator clips of the charger (other interfaces can be customized) to the battery, as + to +, - to -. Then plug the input cable into the charger and connect the input power. Intuitive LED indicators provide intuitive charge status feedback and diagnostic information. See notes below. ‚úî„ÄêHigh Quality Material„ÄëOur lithium battery charger is made of aluminum alloy, with surface oxidation treatment, high hardness, anti-drop and moisture-proof, anti-oxidation, built-in cooling fan, keep the charger itself cool. Cooling protects your charger and battery. Charging is safe. Intelligent circuit chip, improve charging conversion rate, stabilize discharge voltage, charge better than ordinary chargers, more durable, weighs about 1.8KG, ‚úî„ÄêSpecial instructions for the 60A charger„Äë: first plug the charger into the power supply-----look at the voltage---adjust the voltage-----then connect the load-----and then adjust the current. Step1: Do not connect the battery to the charger, turn on the power first, adjust the voltage knob to adjust the voltage, refer to the voltage display at the top of the display, (4S lifepo4 battery 3.65 v*4=14.6V, 3S lithium battery 4.2v *3=12.6V) , adjust to the voltage you need. ‚úî„ÄêStep2„Äë: Adjust the current to the minimum. After connecting the battery, adjust the current from small to large to the current you need. (It is not allowed to adjust the voltage knob again during the charging process, otherwise there will be overcharge or undercharge, which may burn the host at your own risk.) If the current on the display becomes zero, it means it is fully charged. Show More